Business cards 18pt Matte Lam + SPOT UV

Category : Business cards

Availability : In Stock

These luxurious laminated business cards have clear gloss applied to areas of your choice. Choose from soft touch (19pt) or matte lamination (18pt) Slightly raised clear UV gloss Lamination provides a protective layer for cards Perfect for adding tactile

Quantity *

Size *

Stock *

Round Corners *

Coating *

Spot UV *

Turnaround *

CA$ 0.94

How many sets

Submit and Upload File (Allow size per file: 250 Mb. Allow file type:pdf, jpg, jpeg)

Submit Upload Drag & Drop Files

Description

Material & Specs

Please submit two PDF files:

Regular full color artwork.
Spot UV template indicating the area of the SPOT

On the spot UV template file, indicate the spot UV areas by using 100% K. Non-UV areas should be white. For best results, ensure this file is vector.

If you require one side to be completed UV coated, the corresponding page in your template file should be entirely filled with 100% K.
If ordering a 4/4 job with spot UV on only one side, please ensure that page 1 of your artwork is the spot UV side.

We do not recommend extending the spot UV design to the edge of the card, as there would be a high possibility of the varnish peeling off. There should be at least a 5mm varnish-free area around the edges. Failing to provide this could result in delays and/or unexpected print results.

Spot UV accuracy

Positioning ofd the spot UV connot be 100% guaranted. Please not that there may be a shift of approximately 1/16" in the spot UV position on the printed product. We do not recommend placing spot UV on small text or very small images.

File Orientation Guide

(How to set up proper orientation for your files)

File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

Flat Artwork (Postcards, Flyers etc.)

How To Set Up Your Files

(Learn how to set up your files the right way) (General File Preparation Guidelines)

Download our guides to ensure a more optimal print result.
Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
Files must be submitted with proper orientation to ensure proper back up.
It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
File must consist of 1/8" bleed and all important art and text must be within the safety margin.
Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
Black type should have the following values: C0, M0, Y0, K100.
Embed or outline all fonts.
For best colour results, supply a CMYK only files.

See our Support Center for more details.

Template

Final Dimensions	Description	Download
3.5” x 2”
3.5” x 2” rounded corners